Light Box Signs
A light box illuminates the sign face from within, keeping the name and graphics readable when the street light changes. It can sit across a fascia, project from the wall or form part of a freestanding sign. The useful choice is the one people can see from their approach, with lettering that remains clear both lit and unlit.
We design, fabricate and install light box signs from our Coolum Beach workshop. The face, frame and lighting are considered alongside the building and other signage. Our existing work includes the light box above Smash Daddy's awning, Heirloom Wholefoods' blade light box and round light box fabrication shown below.













Approvals, installation and electrical connection
Before manufacture, we check the proposed position, projection and illumination against the site's council and landlord requirements. A shopping centre may have its own sign criteria; Noosa's requirements can differ from Sunshine Coast Council's. Drawings and fixing details help establish what is permitted, without assuming every illuminated sign needs the same approval.
We plan installation access, mounting and maintenance access together. For powered signs, we coordinate the electrical connection with a licensed electrician. That connection is separate from fabricating and fixing the sign, and the existing supply needs checking. For the differences between light boxes, face-lit and halo-lit forms, read our illuminated shop signs guide.
What we make
- Single and double-sided light boxesA lit face towards the street, or two faces where people approach from both directions.
- Blade and projecting light boxesMounted out from a wall so a business name is visible along the footpath, not just across the road.
- Round light boxesCircular forms for a compact logo or name, with the face and frame planned together.
- Fascia light boxesIlluminated shopfront panels that carry the business identity above the entrance or awning.
- Halo-lit and back-lit lettersSeparate illuminated forms rather than a box face, with light directed behind the letters.
- Back-lit retail displaysPrinted display graphics designed for illumination from behind, with colour and contrast checked for that use.
Materials and finishes
LED modules provide the light inside the sign. Their placement matters: an evenly lit face depends on the depth of the box, the spacing of the modules and the way the face diffuses light. Brightness should suit the location rather than overwhelm the shopfront or neighbouring premises.
Acrylic faces and aluminium frames are common light box construction choices. We select the face, frame, fixings and finish for the design and its exposure to sun and weather. Access for later maintenance is considered while the sign is being built in our Coolum Beach workshop.
How it works
- N°001Site and briefSend your logo and site photos. We look at viewing angles, the mounting surface and the available electrical supply.
- N°002Design and approvalsWe prepare a design and work through council, landlord or centre requirements before manufacture.
- N°003Workshop buildFrame, face and lighting are planned as one sign, with the artwork checked for its illuminated appearance.
- N°004Install and connectionWe install the sign and coordinate the electrical connection with a licensed electrician.
Where we work
Our Coolum Beach workshop makes light box signs for shopfronts, hospitality venues and commercial premises across the Sunshine Coast. See what we do in Maroochydore, Mooloolaba, Noosa, Coolum Beach, Peregian Beach and Yandina.
Questions
What affects the cost of a light box sign?
The format, face area, frame construction, artwork, lighting and installation access all affect the quote. An existing power supply and any approvals also need checking. Send photos and your brief so we can price the actual job rather than give a misleading standard figure.
How long do the LEDs last?
It depends on the LED modules, power supply, operating hours, heat and weather exposure. We discuss the components and maintenance access for your sign; there is no single lifespan that applies to every installation. Uneven lighting or flickering is a reason to have the sign checked.
Do I need council approval?
Some signs need approval and others may be allowed subject to conditions. The location, projection, illumination and building all matter. Noosa has its own council, and landlords or shopping centres can have additional requirements. We check what applies before making the sign.
Can you re-skin an existing light box?
Often, but we first check the frame, face retention, lighting and fixings. If the existing box is sound, a replacement face or new graphics may be suitable. Electrical faults or damaged construction need attention rather than simply covering the old face.
Recent work
Light box signs in Noosa, Maroochydore, Mooloolaba, Peregian Beach, Coolum & Yandina
A projecting sign for footpath traffic and a fascia seen from a car park need different layouts. We look at those sightlines for businesses in Noosa, Maroochydore, Mooloolaba, Peregian Beach, Coolum and Yandina, then make the sign to suit its site rather than choosing a shape first.
